Grades and Specifications of Scutellaria baicalensis: Root Diameter, Tiaopin and Kuqin, Assay and Acceptance Criteria

This article is part of the Complete Guide to Scutellaria baicalensisHerb Wiki Editorial TeamLast updated 2026-10-20

Definition in One Sentence

A huangqin specification is a trade convention for grading the dried root in the Chinese medicinal material market. It is defined mainly along four dimensions — root diameter, whether the coarse bark has been tumbled off, degree of selection and baicalin content — with common diameter brackets of 0.4–0.6, 0.6–0.8, 0.8–1.0 and above 1.0 cm. Because there is no mandatory national grading standard, the exact definition must be fixed in the contract as measurable parameters.

First, a Key Point: Grades Are Not Standards

The Chinese Pharmacopoeia sets only a pass line for huangqin (botanical source, description, identification, moisture, ash, extractives, assay, sulfur dioxide, heavy metals, pesticide residues); it does not grade the drug. What the market calls "grade 1 huangqin" or "premium tiaopin" are customary labels formed over long trading practice, and definitions differ between regions, markets and buyers.

This has two practical consequences:

  1. The same name covers different goods: supplier A's "grade 1" may be 0.8 cm and above at 12% assay, while supplier B's may be 0.6 cm and above at 10%. A contract that says only "grade 1" says nothing.
  2. Prices cannot be compared across suppliers: putting quotes built on different definitions side by side must produce a wrong conclusion.

The right approach: break grade into four measurable axes and write each into the contract and the acceptance sheet.

Four Axes: The Real Price Variables

Examples of commercial grades
Figure 1. Examples of huangqin commercial grades: diameter brackets compared with tumbled and untumbled appearance. Placeholder image, to be replaced with a photograph or illustration.

2.1 Assay: the measured baicalin value

This is the first axis, and the only one with a legal minimum: the crude drug must contain not less than 9.0% (calculated on the dried drug). Good commercial material typically runs 12%–16%, the range publicly reported for the Fuping region of Shaanxi where we source.

The effect of assay on price is non-linear: going from 9% to 12% yields about 18 kg more baicalein per tonne at the extraction end, and that extra is pure increment, so the premium on high-assay material usually exceeds the linear ratio of the assay difference. Conversely, selling 10% material at the 12% price is the most common form of "slow-boil" overpricing in this market.

2.2 Diameter: talk in millimetres, not "thick" and "thin"

Diameter is measured at the thickest part of the root and is usually bracketed in cm or by sieve aperture (mesh). Common brackets:

Bracket (diameter)Common nameTypical destination
≥1.0 cmLarge, premium rootsExport, premium decoction pieces, gift packs
0.8–1.0 cmSelected rootsSlicing plants, mid-to-high-end formulas
0.6–0.8 cmMedium, standard rootsBoth decoction pieces and extraction; the largest volume traded
0.4–0.6 cmSmall rootsExtraction feed, small slices
<0.4 cm, finesTailings, broken rootExtraction feed; the lowest price

Note carefully: grading methods differ. Some count by undersize (anything passing an 0.8 cm sieve counts as below 0.8), others by visual proportion ("80% reaching 0.8"). On the same lot the two methods can differ by a whole bracket. The contract should state the sieve specification and the permitted undersize proportion, for example "passing an 8 mm round-hole sieve, undersize not exceeding 10%".

2.3 Tumbling: an appearance step that is also a yield step

Pharmacopoeial processing calls for "sun-dry, then tumble off the coarse bark". The purpose is to remove the outer cork layer and expose the yellowish-white xylem, creating the commercial appearance.

  • Tumbled goods: surface yellowish-white to pale yellow and smooth, cross-section bright yellow. Decoction-piece plants and export customers almost exclusively buy tumbled material.
  • Untumbled goods: brownish-yellow, rough outer bark with an earthy cast. Extraction plants accept it, but note that the cork itself carries weight — for the same nominal tonne, untumbled material contains 3%–8% less actual medicinal tissue.

So "untumbled is cheaper" is often not really cheaper. Once converted to medicinal tissue, the gap frequently disappears — or reverses.

2.4 Cleanliness: unselected and selected lots

  • Unselected: not sorted by size, impurities not picked out; the whole lot is sieved and bagged.
  • Selected: impurities, mouldy, insect-damaged and misshapen roots are picked out by hand before grading.

The hand-labour cost of selection shows directly in the price, typically 5%–15% above unselected material of the same assay. The buyer has to decide whether uniformity or low cost matters more. Automated feed lines need uniformity; a decoction-piece workshop that sorts by hand may not.

Pharmacopoeial Limits vs Common In-House Values

ItemPharmacopoeial requirementCommon in-house valueNote
Botanical sourceScutellaria baicalensis GeorgiSame, with a source declarationSubstitution within the genus is the main risk
Baicalin≥9.0% (dried drug)≥10% or ≥12%≥11% recommended for extraction
Moisture≤12.0%≤10.0%Any excess is hidden weight gain
Total ash≤6.0%≤4.5%High values suggest soil adulteration
Extractives≥40.0% (dilute ethanol, hot extraction)Per customer requirementSpent mare is often markedly lower
Sulfur dioxide≤150 mg/kg (general chapter)Often ≤150 or lowerStricter for export and dietary supplements
Heavy metalsGeneral Chapter 0212, Table 3: Pb ≤5, Cd ≤1, As ≤2, Hg ≤0.2, Cu ≤20 mg/kgAll four testedMoved from the monograph into the general chapter from the 2025 edition
Pesticide residuesBanned pesticides not detectable (general chapter Table 1)Export often adds non-listed itemsSet by the target market
Impurities≤3% (general chapter)≤1%–2%Includes soil and non-medicinal parts
Mould and insect damageNone permittedNone permittedAlways checked on arrival, especially in hot, humid seasons

Values in the table are taken from the 2025 Chinese Pharmacopoeia, in force from 1 October 2025. This article does not replace the official standard.

One structural change in the 2025 edition is worth noting: heavy metals and harmful elements were moved out of the Scutellaria monograph and into Part IV, General Chapter 0212, Table 3, with unchanged limits. For general-chapter items a company may choose whether to test and report, but legal responsibility for quality is not thereby removed — heavy metals missing from a report does not mean they are irrelevant to that lot.

How to Compare Quotes: The One Correct Division

The correct approach is to convert prices to cost per kilogram per 1% baicalin:

comparable price = price per kg ÷ measured baicalin percentage

An illustration of the logic (prices are examples, not market data): lot A at 42 per kg with 9.5% assay gives a comparable price of 4.42; lot B at 50 per kg with 12.5% gives 4.00. On the surface A is 16% cheaper, but converted by assay B is actually 10% cheaper.

Going one step further, fold in tumbling and cleanliness:

effective price = comparable price ÷ (1 − cork and impurity loss rate)

Allowing 5% loss for untumbled goods adds 5% to the comparable price. Only after both steps does the real ranking of quotes appear.

Sampling and Acceptance: Doing It Defensibly

Sampling: sample by batch, taking material from the top, middle and bottom of each package, then mixing and quartering down to the test quantity. With many packages, sample proportionally — not "a handful grabbed at random".

Four checks possible on site

  1. Moisture: a rapid moisture meter for a first on-site reading, with the 105 ℃ constant-weight method as reference; above 12%, reject or discount outright.
  2. Impurities and ash: weigh a random 500 g, pick out soil, fibrous roots and non-medicinal parts, and calculate the percentage by weight.
  3. Diameter: sieve through a round-hole sieve of the specified aperture and weigh the undersize fraction.
  4. Appearance: cross-section colour, odour, presence of mould or insect damage, and any abnormal brightness (a sign of sulfur fumigation).

Three items that must go to the laboratory: baicalin assay (HPLC), sulfur dioxide, and heavy metals with pesticide residues. Assay is the one indicator that cannot be judged by experience and must be read from a report; where possible, have a third party re-test.

Retention samples: keep at least 200 g per batch until the contractual warranty period ends. In a dispute, the retention sample is the only physical evidence that can speak for you.

Four Recurring Problems and How to Spot Them

1. Mixed sizes (large and small roots blended)

Symptoms: uniform at a glance, obviously variable when poured out. Detection: sieve and weigh the undersize fraction against the contract; or sample in three layers and sieve each separately.

2. Water spraying to add weight

Symptoms: feels heavy, sticky in the hand, condensation on the inside of the packaging. Detection: measure moisture on site and compare the weight of equal volumes. Three percent added water is a hidden 3% price increase.

3. Spent mare returned

Symptoms: dull colour, faint odour, light and brittle, poor floury texture in the cross-section. Detection: assay — spent mare usually contains under 3% baicalin and is exposed immediately; alcohol extractives can help confirm.

4. Sulfur fumigation

Symptoms: abnormally bright colour, sour odour, irritation on tasting. Detection: only sulfur dioxide test data is reliable; appearance is not. The contract should specify the method (pharmacopoeial general chapter) and the limit.

There is also botanical substitution (admixing S. amoena, S. rehderiana, S. viscidula and others), which requires fingerprints or DNA barcoding as evidence; the naked eye cannot reliably distinguish them.

Writing Contract Clauses That Actually Work

Turning a grade into enforceable clauses requires all four elements:

  1. Parameters: baicalin ≥X% (HPLC, on the dried drug), moisture ≤X%, total ash ≤X%, sulfur dioxide ≤X mg/kg, impurities ≤X%.
  2. Method and basis: cite the general-chapter number of the pharmacopoeial method; in a dispute, the result of a mutually accepted third-party laboratory prevails.
  3. Sampling and decision rules: sampling ratio, treatment of non-conforming goods (return, discount or replacement), number of re-tests and who bears the cost.
  4. Change notification: changes in origin, harvest season or processing method (especially sulfur fumigation and drying) must be notified in writing in advance. This clause prevents more risk than the price clause.

Storage and Maintenance

  • Store in a ventilated, dry place, protected from damp, insects and rodents; woven bags or cartons with a moisture-barrier liner are common.
  • Bring moisture below 10% before warehousing; stack away from walls and off the floor, leaving ventilation channels.
  • Inspect more often during the hot, humid months (June–September); if moisture returns, restack and sun-dry or re-dry immediately.
  • Store away from strong-smelling materials; huangqin readily picks up odours.
  • Turn stock over within 12 months. Old stock darkens and loses odour; assay may still pass, but commercial value has fallen.

FAQ

Q1: How many grades does huangqin have?

There is no mandatory national grading. The market conventionally separates unselected and selected lots and then subdivides by diameter; actual transactions rely on the physical parameters agreed in the contract.

Q2: Which is more expensive, tiaopin or kuqin?

Usually tiaopin. It is firm with a higher yield and suits both extraction and decoction pieces; kuqin is hollow, has less active constituent per unit weight and costs less, but it is traditionally used to clear lung fire and still has steady demand.

Q3: What specification should an extraction plant buy?

Assay first, diameter second. We suggest baicalin ≥11%, moisture ≤10% and sulfur dioxide within the target market's requirements; 0.4–0.8 cm extraction material is sufficient, with no need to pay a premium for "large roots".

Q4: What specification should a decoction-piece plant buy?

Diameter and uniformity first, with assay and tumbling as secondary considerations. Slicing thin pieces demands consistent diameter; mixed sizes give uneven slices and lower yield.

Q5: Can "sulfur-free" be told by smell?

Not reliably. Low residues cannot be smelled, and high residues sometimes smell sour but are easily masked. Sulfur dioxide test data is essential.

Q6: How do fresh and dry material convert?

The fresh-to-dry ratio is generally 2.5–3:1. Confirm before negotiating whether the price is for fresh or dry material, or the difference will be misread as a market move.

Q7: Why does the same lot give different assay results on two tests?

Sample representativeness, grinding fineness, drying and method all affect the result. The proper practice is one laboratory, one method and duplicate samples, with assay differences normally held within 0.5 percentage points.

Q8: Can old stock still be used?

It can be used if assay passes, but colour and odour are reduced and commercial value is low. It is acceptable for extraction, usually not for decoction pieces or export.

Q9: Can huangqin be sliced and stored long term?

Not advisable. Slicing greatly increases surface area and the risk of moisture uptake, oxidation and insect damage; store whole roots and slice as needed.

Q10: Can material from different regions be blended?

Technically yes, but it breaks batch traceability and is usually prohibited for export and dietary supplements. If blending is unavoidable, keep records of the proportion from each origin.

References and Search Strategies

  1. Chinese Pharmacopoeia Commission. Pharmacopoeia of the People's Republic of China (2025 edition, Part I), monograph "Scutellaria baicalensis".
  2. Chinese Pharmacopoeia Commission. Pharmacopoeia of the People's Republic of China (2025 edition, Part IV), General Chapter 0212 General Rules for the Testing of Crude Drugs and Decoction Pieces, General Chapter 0512 High-Performance Liquid Chromatography, General Chapter 2331 Determination of Sulfur Dioxide Residue.
  3. Research on commercial specifications and grades of huangqin: CNKI search 黄芩 AND (商品规格 OR 等级 OR 质量评价).
  4. Comparison of constituents in huangqin from different origins: PubMed search Scutellaria baicalensis AND (origin OR geographical OR quality).

Items 3 and 4 are search paths rather than specific citations; use them to locate and verify the original papers.

Disclaimer

This article is technical material on the commercial drug and quality control, intended for buyers, QC and production staff. It does not constitute a compliance opinion or trading advice. Limits, brackets and in-house values change with standards and market practice; for actual transactions, rely on the current official standard, the agreed contract and third-party test reports.