GMP Facility
Manufacturing license, process specifications, quality control, and batch traceability.
Facility & Production Lines
The facility is zoned by process flow: charging and extraction, solid-liquid separation, concentration, refining (column chromatography or crystallization), drying, milling and blending, and inner packaging. Personnel and material flows are separated, with unidirectional material movement to prevent cross-contamination and backflow.
- All equipment and piping contacting material are 316L stainless steel, with clean-in-place (CIP) capability; product changeovers follow cleaning procedures.
- Extraction and concentration record temperature, time, solvent usage, and recovery rate; drying records method, temperature, and endpoint moisture.
- The inner packaging area's cleanliness class is controlled per product; personnel gowning, material in/out, and utensil transfer each have dedicated channels.
Capacity varies significantly by product; batch size and production lead time for a specific product are confirmed at quotation.
Quality System & Batch Records
Each batch from charging to warehousing has a corresponding batch record: material lot numbers and charge amounts, process parameters, intermediate testing, finished-product testing, deviations and their dispositions, archived after dual sign-off by production and QA.
- Material management: an approved supplier list and incoming inspection; use before testing is not allowed.
- Deviations and changes: any departure from process parameters requires a deviation record; changes to process, supplier, or equipment follow change control, with impact assessed on in-process batches.
- Retention and stability: each batch is retained for one year beyond its expiry; major in-production products undergo accelerated and long-term stability studies.
Under an NDA, customers may review batch-record summaries and raw test data for their purchased batches.
Validation & Audits
Process validation is conducted over three consecutive production batches, with critical process parameters and intermediate specifications fixed in the validation report; cleaning validation samples the hardest-to-clean product to confirm residues are below limits.
Calibration of equipment and instruments, and routine monitoring of purified-water and HVAC systems, are fully recorded and available for on-site review.
Audit arrangements: schedule 5 business days in advance to tour the production lines, warehouse, laboratory, and batch records, and to take on-site samples. We will prepare English-language questionnaires or third-party audit reports upon request.