Baicalein Specifications and Test Methods: What Really Differs Between 90%, 95%, and 98%

Part of Baicalein Complete GuideHerb Wiki Editorial TeamCAS 491-67-8Last updated 2026-10-20

Definition in One Sentence

A baicalein specification is the assay grade of commercial baicalein (CAS 491-67-8) as measured by high-performance liquid chromatography, together with its associated control items — impurities, moisture, particle size, heavy metals, and microbial limits. The mainstream market grades are 90%, 95%, and 98%; they differ mainly in purification depth and impurity profile, not in chemical structure.

A Specification Is Not a Single Number: Eight Items

A usable baicalein specification contains at least eight categories of information:

ItemTypical requirementWhy it matters
Assay≥90% / ≥95% / ≥98% (HPLC)The pricing basis, but the calculation basis must be stated
Related substancesBaicalin, wogonin, oroxylin A, etc.Reflects the degree of hydrolysis and the purification level
Appearance and colorPale-yellow to yellow powder / crystalsDarker color usually indicates oxidation or insufficient purification
Moisture≤5% (commonly ≤3%)Affects stability and the assay conversion
Ash / residue on ignition≤0.5%–1.0%Reflects inorganic residue
Heavy metalsPb, As, Cd, Hg — four itemsTesting only lead and arsenic is incomplete
Microbial limitsTotal plate count, coliforms, SalmonellaMandatory for oral and topical raw materials
Residual solventsEthanol, methanol, etc. (when organic purification is used)Critical for export and pharmaceutical use

Particle size and solubility are usually listed separately, because they are not "purity" indicators but "usability" indicators — 80 mesh and 100 mesh behave completely differently in tableting and suspension processes.

What Really Differs Between the Three Grades

GradePurification depthImpurity profileColorFit-for-use
90%Single purificationBaicalin residue up to 2%–5%, related flavones presentPale yellow to yellow, slightly darkerCosmetic ingredients, feed and veterinary drugs, food-grade supplements
95%Second purification or chromatographyGlycoside residue down to around 1%, fewer unknown peaksPale yellowHighly standardized formulations, export grades, formulation raw material
98%RecrystallizationClean impurity profile, individual impurities usually <0.5%Yellow needle crystalsReference standards, pharmaceutical intermediates, injection-grade research

Why the price of 98% is non-linear: going from 90% to 98% is not "another 8 points of purity" but the removal of the hardest-to-separate components in those last few points. Yield loss at this step often exceeds 30% and the batch size is small, so unit cost rises much faster than the assay.

A counterintuitive recommendation: if your application is cosmetics or feed, the impurities in the 90% grade (mainly baicalin and related flavones) pose no risk, and paying a premium for 98% is wasted spend. Conversely, for cell experiments or reference standards you must use 98%, because impurities in the 90% grade interfere with the dose–response relationship.

HPLC Method: Parameters and Rationale

Baicalein has a conjugated flavone system with strong UV absorption, so routine HPLC-UV is sufficient for accurate quantification; ELSD or MS is not required.

Typical method parameters (non-compendial; for method development and comparison reference)

ParameterCommon setting
ColumnC18, 4.6 × 250 mm, 5 μm (or a 2.1 mm narrow-bore column for LC-MS)
Mobile phaseMethanol–0.1% aqueous phosphoric acid (about 55:45), or an acetonitrile–0.1% aqueous phosphoric acid gradient
Detection wavelength274 nm or 280 nm (baicalein absorbs maximally at about 274 nm)
Flow rate1.0 mL/min
Column temperature30–35 °C
Injection volume10 μL
Reference standardBaicalein reference standard, dissolved in methanol
CalculationExternal standard peak area, calculated on the dried basis

Three critical points in method selection

  1. Wavelength: 274 nm gives higher sensitivity; 280 nm matches the pharmacopoeial method for Scutellaria and makes it easier to align with upstream data. The report must state which one was actually used.
  2. Mobile-phase acidity: baicalein contains phenolic hydroxyl groups and tails badly in a neutral mobile phase. Adding phosphoric acid (0.1%) suppresses dissociation and gives a symmetrical peak.
  3. System suitability: theoretical plate count, resolution between the main peak and adjacent impurity peaks, tailing factor, and repeatability of consecutive injections — without these four, the method might as well be unvalidated.

Related Substances: They Reveal More About the Process Than Assay Does

Baicalein impurities come mainly from three sources: unhydrolysed baicalin, related flavones (wogonin, oroxylin A, etc.), and oxidation and degradation products.

ImpuritySourceWhat it tells you
BaicalinIncomplete hydrolysisThe most critical process indicator; must be explicitly reported for the 90% grade
WogoninCo-existing in the raw material; incomplete separationStructurally close to baicalein, hard to separate
Oroxylin ACo-existing in the raw materialUsually appears together with wogonin
Oxidation productsImproper storage or dryingAccompanied by darker color

Interpretation principle: an assay of 90% with 5% baicalin residue means "the assay passes but the process is crude"; an assay of 90% with 0.5% baicalin residue and the rest related flavones means "separation is well done, but the raw material itself is impurity-rich". The first can be fixed by improving the process; for the second you can only change the raw material — and this is the dividing line by which a buyer judges a supplier's capability.

Related-substance methods usually use the self-comparison method with the principal component (diluting the main component as the reference) or area normalization with correction factors. Either way, the report should give the largest single impurity and total impurities; a bare conclusion that "related substances comply" conveys no information.

Reading a Chromatogram: Five Points to Check

Baicalein HPLC chromatogram
Fig. 1 Baicalein HPLC-UV chromatogram: distribution of the main peak and related substances. Placeholder image, to be replaced with a real/illustrated asset.

A trustworthy chromatogram can be checked at five points:

  1. Main-peak position and shape: does the retention time match the reference standard, and is the tailing factor between 0.9 and 1.5?
  2. The baicalin peak before the main peak: if present with a non-trivial area, hydrolysis was incomplete; if completely absent, suspect that the chromatogram came from a high-purity batch.
  3. Baseline: heavy drift or high noise makes the integration unreliable, and the assay figure should be discounted.
  4. Unknown peak cluster: small unknown peaks after the main peak are often oxidation products, corresponding to darker color.
  5. Chromatogram-to-batch correspondence: does the trace show the sample name, batch number, injection date, and method file name? If any of the four is missing, the trace could belong to any batch.

The three most common chromatogram problems: the same image used in multiple reports; obvious signs of manual integration (a flattened baseline); and a trace that does not reconcile with the assay figure in the report (the area ratio does not compute). The third is the easiest to spot — a calculator is enough to check it.

Assay Calculation: A Hidden 2-Percentage-Point Difference

Assay can be expressed on two bases:

  • As-is: calculated directly from the weighed sample;
  • Dried basis: converted after deducting moisture.

Take our batch 2026091201: measured assay 90.12%, moisture 2.36%. If 90.12% is on an as-is basis, the dried-basis figure is:

90.12% ÷ (1 − 2.36%) = 92.30%

For the same lot, the two bases differ by 2.2 percentage points. That is not a rounding error — on a 90% grade it is enough to decide "pass" versus "fail", and enough to explain why two suppliers' "90%" looks different in quality.

So you must ask one question when requesting a quote: is the assay calculated on a dried basis or as-is? The specification sheet should read "Assay ≥90.0% (HPLC, on dried basis)", leaving no room for interpretation.

Test Methods for the Other Items

ItemMethodKey point
MoistureOven-drying (constant weight at 105 °C) or Karl Fischer titrationKarl Fischer is more accurate when solvent of crystallization is present
Residue on ignitionIgnite at 550 °C to constant weightReflects inorganic salts and catalyst residues
Heavy metalsICP-MS or atomic absorptionAll four measured: Pb, As, Cd, Hg
Residual solventsHeadspace gas chromatography (GC-HS)Methanol, ethanol, acetone, etc., per ICH Q3C limits
Particle sizeLaser diffraction or standard sievesThe report should give either D50 or the sieve pass rate — state which
IdentificationIR, UV, MS, NMRFor high-purity material, at least IR + MS is recommended
Melting pointCapillary methodLiterature value 256–271 °C; deviation suggests a purity or polymorph issue

Sampling and Acceptance

  • Homogeneity: baicalein is a powder or crystalline solid and stratifies easily. Mix thoroughly before sampling and combine samples from the top, middle, and bottom layers.
  • Sample size: not less than 100 mg for assay (per the method's weighing requirement); take a separate portion for related substances.
  • Replicates: duplicate determinations are recommended for assay; if the relative deviation exceeds 1.0%, investigate the cause.
  • Retained samples: at least 50 g per batch, kept until 6 months after the shelf life, for retesting in disputes.
  • Acceptance rule: failure of any single item — assay, related substances, heavy metals, or microbial limits — means the batch is rejected; there is no "overall assessment".

How to Send Samples for Third-Party Retesting

  1. Choosing the lab: prefer a laboratory with CNAS/CMA accreditation that has handled similar flavone products; do not choose on price alone.
  2. Send a blind sample: include a reference sample of known assay to evaluate the lab's accuracy. This step filters out a fair number of "report mills".
  3. Sample quantity: three times the quantity needed for testing, keeping one portion for any repeat test.
  4. Specify the method: state the method on the request form (or "lab to select and report the method") and require the original chromatograms to be attached.
  5. Compare with historical data: only data from the same lab and the same method are comparable; differences between labs usually come from the method, not the quality.

Specification Sheet Field Checklist (Ready to Copy)

Product name: Baicalein
CAS No.: 491-67-8
Molecular formula / molecular weight: C15H10O5 / 270.24
Botanical source: dried root of Scutellaria baicalensis Georgi
Assay: ≥90.0% (HPLC-UV, 274 nm, on dried basis)
Related substances: baicalin ≤2.0%; largest single impurity ≤1.0%; total impurities ≤5.0%
Appearance: pale-yellow to yellow powder
Identification: IR consistent with reference standard; HPLC retention time consistent
Moisture: ≤5.0%
Residue on ignition: ≤1.0%
Heavy metals: Pb ≤1.0, As ≤1.0, Cd ≤0.5, Hg ≤0.1 (mg/kg)
Microbial limits: total plate count ≤1000 cfu/g; coliforms absent; Salmonella absent
Particle size: 100% through 80 mesh (or D50 = XX μm)
Packaging: 25 kg fiber drum, lined with double-layer PE bags
Storage: protected from light, sealed, cool and dry
Retest period: 24 months

The value of this checklist: it translates the vague label "90%" into 14 acceptance clauses. A buyer can adapt it and use it directly; a seller can follow it and avoid disputes.

Frequently Asked Questions

Q1: Do 90% and 98% baicalein differ much in effect?

In cosmetic and feed applications where impurities pose no risk, the difference is limited; in cell experiments, reference standards, and injection-grade research it is significant, because impurities interfere with the dose–response relationship and with analytical methods.

Q2: Why do two suppliers' 98% prices differ by a factor of two?

Three possibilities: different test methods (UV versus HPLC), whether related-substance data are included, and differences in purification process and batch size. Align on the method first, then discuss price.

Q3: Why test related substances for baicalein?

Because an assay figure can be made up of "the main component plus a pile of impurities"; only related-substance data show what those impurities are, how much there is, and at which process step they arise.

Q4: What does "assay on a dried basis" mean?

The assay converted after deducting moisture. With 2.36% moisture, 90.12% as-is is equivalent to 92.30% on a dried basis. Always confirm the basis when requesting a quote.

Q5: Without a pharmacopoeial method, do test results have legal force?

Yes, provided the method is validated and agreed in the contract. Company standards, industry standards, and mutually accepted methods can all serve as the basis for acceptance — what matters is agreeing in advance.

Q6: Can chromatograms be falsified?

Yes, and it is not difficult. So check whether the trace is annotated with sample name, batch number, date, and method, and whether the area ratio reproduces the reported assay.

Q7: Why does baicalein darken on storage?

Oxidation of the polyhydroxy flavone. Light, heat, alkaline conditions, and metal ions all accelerate it. Darkening is usually accompanied by a drop in assay and an increase in unknown peaks.

Q8: Is the 95% grade worth having?

Yes. It is the compromise grade — "cleaner than 90%, cheaper than 98%" — and is common for exports and highly standardized formulations. But if your customers only want 90% or 98%, the middle grade becomes an inventory burden.

Q9: Why do solubility data differ between suppliers?

Because the measurement method (shake-flask, HPLC), temperature, equilibration time, and medium pH all differ. Baicalein solubility rises markedly in alkaline media, so a claim of "water-soluble" often omits the pH.

Q10: Does a COA have an expiry date?

A COA corresponds to a batch and has no expiry date of its own, but the product has a retest period (commonly 24 months). Material past its retest period must be retested; the original report cannot be reused.

References and Search Suggestions

  1. Chinese Pharmacopoeia Commission. Pharmacopoeia of the People's Republic of China (2025 Edition, Volume IV), General Chapter 0512 High-Performance Liquid Chromatography, General Chapter 0832 Determination of Water, and General Chapter 0841 Residue on Ignition.
  2. Chinese Pharmacopoeia Commission. Pharmacopoeia of the People's Republic of China (2025 Edition, Volume I), monograph "Scutellaria baicalensis" (the baicalin HPLC method, a useful starting point for baicalein method development).
  3. ICH Q3C Impurities: Guideline for Residual Solvents and ICH Q2(R1) Validation of Analytical Procedures.
  4. Baicalein analytical methods: PubMed search query baicalein AND (HPLC OR quantification OR validation).

Items 3 and 4 give search paths rather than specific citations; follow them to retrieve and verify the original texts when needed.

Disclaimer

This article is reference material on raw-material testing and quality control, intended for R&D, QC, and procurement personnel; it does not constitute compliance advice. The method parameters given are examples of common practice; actual testing must follow validated methods and current standards. Regulations and limits change with revisions — always refer to the latest text.